Hardware setup

SmartPOS

SmartPOS is a hardware-integrated solution that uses Sunmi terminals built on an Android-based OS. It supports native POS applications directly on the device while managing payment processing through a secure payment application.

Tap to Pay

Tap to Pay allows standard Android devices to process contactless payments using their built-in NFC antenna. Card data is managed via our dedicated payment app, featuring PIN-on-Glass support for secure, integrated PIN entry.

This page outlines the configuration of the hardware.

Connect to a Wi-Fi network

To connect to a Wi-Fi network:

Go to Settings > Network & Internet > WLAN
Select your Wi-Fi network.

For more information about Wi-Fi connection, refer to the manual provided with the terminal.

Connect to the SmartPad

SmartPad is a cable-powered terminal that must be connected to a power cable.

To enhance network stability, we recommend that you connect the SmartPad to a network cable.

Manage battery

If your battery is not charging, ensure that you are using a USB-C cable that is properly connected to the power source.

Print receipts

To print your receipt, you need a thermal printer roll of either 57mm or 58mm.

Turn on the terminal

Charge the terminal for at least 30 minutes.
Press and hold the power button for a few seconds to switch it on.

For more information, see the manual provided with the terminal.